Back Home

iPad PRO KITS

PRO_SDU
This is the PRO-SDU! This is a full face Slidedock universal kit for the 12.9" ipad pro . This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a cable must be glassed in to hold iPad. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing iPad. There are 1/8" overhanging edges on the the dock connector side and top edge of the iPad which allows the iPad to be mounted vertically without a problem. The back plate is solid and flat and can be cut to allow for access to other items. It also has a nice finished top edge plate with rounded corners and beveled edges inside and outside. This can also be mounted by simply screwing it in like a headrest monitor or it can be glassed in for custom applications! Great for home, RV, trailers, or car applications. Dimensions are 12 13/16" x 9 3/8" x 5/8" with the top flange removed and 13 9/16" x 10 1/8" with flange.
Retail price is $129.95
Price: $129.95

PRO-SL
This is the PRO-SL(spring loaded) kit for the 12.9" iPad PRO! For the smaller 9.7" Pro please see the Air-SL or air-SDU kits in the iPad air section. This is a full faced kit where the iPad drops in from the front of the kit. the kit goes in top side first, pushes flat and then slides over into the dock connector (lightning cable is not included and must be glassed or epoxied in). Once docked, there are 1/8" retainer lips that overhang the iPad on the dock side and top side to secure it. To release, slide the iPad away from the cable, and the spring loaded back plate will automatically push the iPad up to release easily and grab. Dimensions are 12 13/16" x 9 3/8" x 5/8" with the top flange removed and 13 9/16" x 10 1/8" with flange. Retail price is $134.95
Price: $134.95

PRO-SDF
This is the PRO-SDF kit for the 12.9" iPad PRO! For the smaller 9.7" Pro please see the Air-SL or air-SDU kits in the iPad air section.This is a full faced kit where the iPad drops in from the front of the kit. the kit goes in top side first, drops flat and then slides over into the dock connector (lightning cable is not included and must be glassed or epoxied in). Once docked, there are 1/8" retainer lips that overhang the iPad on the dock side and top side to secure it. To release, slide the iPad away from the cable, push in on the top side of the iPad and the back flex plate will allow the iPad to kick up to release easily and grab. The back plate is totally flat to provide a clean smooth look once removed. Dimensions are 12 13/16" x 9 3/8" x 13/16" with the top flange removed and 13 9/16" x 10 1/8" with flange. Retail price is $139.95
Price: $144.95

PRO105-SDU
This is the PRO105-SDU! This is a full face Slidedock universal kit for the 10.5" ipad pro . This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a cable must be glassed in to hold iPad. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing iPad. There are 1/8" overhanging edges on the the dock connector side and top edge of the iPad which allows the iPad to be mounted vertically without a problem. The back plate is solid and flat and can be cut to allow for access to other items. It also has a nice finished top edge plate with rounded corners and beveled edges inside and outside. This can also be mounted by simply screwing it in like a headrest monitor od it can be glassed in for custom applications! Great for home, RV, trailers, or car applications. Dimensions are 7 7/16" X 10 7/8" X 9/16" once the flange edge is removed. With the flange edge it is 8 5/8" x 11 7/8". $109.95
Price: $109.95

PRO105-SL
This is the PRO105-SL(spring loaded) kit for the 10.5" iPad PRO! For the smaller 9.7" Pro please see the Air-SL or air-SDU kits in the iPad air section. This is a full faced kit where the iPad drops in from the front of the kit. the kit goes in top side first, pushes flat and then slides over into the dock connector (lightning cable is not included and must be glassed or epoxied in). Once docked, there are 1/8" retainer lips that overhang the iPad on the dock side and top side to secure it. To release, slide the iPad away from the cable, and the spring loaded back plate will automatically push the iPad up to release easily and grab. Dimensions are 7 7/16" X 10 7/8" X 5/8" once the flange edge is removed. With the flange edge it is 8 5/8" x 11 7/8". $129.95
Price: $129.95

Halo-Pro
Halo-Pro is a add on modification to the Pro-SDU and Pro-SL. We incorporate a halo ring into the kit housing and include a LED string of choice that can be epoxied into place on the back after building in your kit. Just needs 12 volt positive and negative.
Price: $74.95
LED COLOR: